17 Stations Highway Guardrail Roll Forming Equipment 3T 1.0 - 4.0mm Thickness

Machine list

Product specifications

1. Cutting: the material will sent into the unit guide wheel

2.The material is leveled by three roller grinding machine and four roller grinding machine.

The diameter of forming shaft is Φ80mm (material # 45 will be quenched), the roll materials isGCR15,

quenched to HRC58 ° -62 °, surface is plated hard chrome .

3. Profiles: Profile Thickness: 2.0mm-4.0mm; width of profiles unfold: 482 mm; profiles Material: Q235

4. Punching: hydraulic punching (material Cr12 steel mold will be quenched, and it can be adjusted all around)

5. Cutting off: hydraulic shearing knife mold, materials:Cr12, quenching:HRC60-62

6. Host Power: 15KW

7. Cycloid reducer power: 15KW

8. Drive: Gear (high frequency hardened), 2-inch single row chain

9. Hydraulic station motor power: 15KW, pressure:20Mpa

10. The unit uses frequency conversion adjusting speed in 5m-10m / min

11. The electronic control part: PLC NC frequency electrical boxes, touch-screen. Counting by encoder,

can arbitrary control the length and the number of profiles,

Accuracy:± 1.0mm, automatic hydraulic shear, the system with punching center side hold machineand punching center hole machine.

12. Dimension of equipment: Length 18m ×Width 1.2m ×High 1.5m

Profile drawing

Machine pictures

highway guardrail roll forming machine

guard rail roll forming machine

17 Stations Highway Guardrail Roll Forming Equipment 3T 1.0 - 4.0mm Thickness Images